Unicode (as UTF-8) is a very popular format for encoding filenames on disk, but there are some subtly incompatible variants around. In particular, different operating systems have different ideas about how accents should be handled.
Mac applies something called NFD to filenames before they are stored on disk (Normalization Form Canonical Decomposition). This means that a character like the “ū” in the word “Jingū” is stored as two Unicode characters – a plain old
LATIN SMALL LETTER U character, followed by a
COMBINING MACRON character:
ls | grep 2009_11_03 | od -c -tx1 0000000 2 0 0 9 _ 1 1 _ 0 3 M e i j i 32 30 30 39 5f 31 31 5f 30 33 20 4d 65 69 6a 69 0000020 J i n g u ̄ ** \n 20 4a 69 6e 67 75 cc 84 0a
Windows does the exact opposite (NFC), combining the “u” and the macron together to produce a single
LATIN SMALL LETTER U WITH MACRON character.
0000000 2 0 0 9 _ 1 1 _ 0 3 M e i j i 32 30 30 39 5f 31 31 5f 30 33 20 4d 65 69 6a 69 0000020 J i n g ū ** \n 20 4a 69 6e 67 c5 ab 0a
On Linux, I’m not sure if there is a standard, but it’s typical to find filenames encoded with NFC. If anything, the standard in Linux is that a filename is just a series of bytes and the OS shouldn’t try to mangle them by converting the characters with NFC or NFD normalization forms.
I recently set up a second computer as a FreeNAS 9.2.0 storage device, and I wanted to migrate the files from my MacBook to it. The most straightforward way to do this is to enable the Apple “AFP” network filesharing service on FreeNAS, then on the Mac, copy the files to that network share however you like. This automatically takes care of any character conversion for you.
However, I tried this and only achieved about 2MB/s transfer speeds. I would have died of old age before I would have been able to copy my terabytes of data to FreeNAS.
So, instead I used rsync to send my files directly to the ZFS storage on FreeNAS, bypassing any of its network file system protocols. This achieved a steady ~110MB/s, which is wonderful. The issue came when I went to read those same files over AFP: I could briefly see folders that contained accents in the finder, but they would disappear after several seconds, then reappear 10 seconds later, then disappear again!
The issue was that rsync, being Linux-oriented, preserves the filename encoding when sending files, so the filenames on FreeNAS ended up still in Mac’s NFD format (with accents encoded as separate characters). This is a problem because netatalk, the AFP server on FreeNAS, expects filenames on FreeNAS volumes to be encoded in the “vol charset” which is defined in its configuration file:
FreeNAS doesn’t set this explicitly, so it defaults to “UTF8”. Although the netatalk manual doesn’t say it, “UTF8” actually implies “UTF8 in NFC form”, so netatalk will be unable to serve the NFD-encoded filenames that originated on my Mac correctly. What happens is that a MacOS X client lists a directory over AFP, so netatalk converts the filenames on disk (that it thinks are NFC) to NFD (a no-op, since we’ve actually put NFD filenames on there to start with). This allows the accented characters to show up properly in MacOS and the listing looks okay. But then MacOS’s finder asks for more information about a file specifically by name. Netatalk converts the NFD filename that MacOS provides to the vol charset (set to NFC form), and then tries to look it up on the filesystem. But the filename doesn’t exist on the disk in NFC form, so it can’t find the file. This causes the file to disappear again in MacOS’s Finder.
Here are three ways of solving the problem, in order from worst to best:
Option 1: Change vol charset to UTF8-MAC
Changing the vol charset to “UTF8-MAC” will fix the issue by letting netatalk know that the filenames on disk are in NFD form.
The “vol charset” setting is found in the
afp.conf file at
/usr/local/etc/afp.conf. But you shouldn’t edit this file, as it is automatically regenerated at various times by the script
/usr/local/libexec/nas/generate_afpd_conf.py. Instead, edit that script:
# Remount root as writable so we can edit the script: mount -uw / nano /usr/local/libexec/nas/generate_afpd_conf.py
Find this section:
cf_contents.append("\tmax connections = %s\n" % afp.afp_srv_connections_limit) cf_contents.append("\tmimic model = RackMac\n") cf_contents.append("\tvol dbnest = yes\n") cf_contents.append("\n")
append("\n") line, add:
cf_contents.append("\tvol charset = UTF8-MAC\n")
Save and exit, then:
# Remount root as readonly and commit our changes to disk (takes ages on a USB flash drive, so be patient) mount -ur /
Now on FreeNAS’s Services/Control Services page, turn AFP off and back on in order to regenerate its configuration file. You should see the new line added when you
cat /usr/local/etc/afp.conf. Your Mac-encoded filenames will now serve correctly through AFP!
Option 2: Change the encoding of the filenames on FreeNAS’ disk to NFC
Alternatively, you could leave the AFP configuration alone and change the filename encoding on disk instead. This will make the files available to Mac, but with the caveat that the filenames will no longer be the same as your source files due to the encoding difference, and rsync that runs directly against ZFS will no longer consider them to be the same files.
I did this by creating a new plugin jail, then adding my ZFS volume as additional storage to that jail. From that jail’s console button, I used “pkg install convmv” to install the convmv package, which can change filename encodings. I changed the encoding to NFC like so:
convmv -f utf-8 -t utf-8 --nfc -r --no-test /mnt/my-files
(You should run without –no-test first so convmv can tell you exactly what it plans to do, before you accidentally mangle your filenames more!)
Option 3: Go back in time and copy the filenames correctly in the first place
You can avoid this whole issue in the first place by having rsync convert the filenames to NFC as they are copied to ZFS:
rsync -a --iconv=utf-8-mac,utf-8 my-files/ email@example.com:/mnt/my-files/
In fact, if you fix the filenames using Option 2, then do all your future rsyncs with the character conversion specified here, everything will be hunky-dory!